Adapters and Bushing
Adapters act as reducing couplings. They are applicable a change to the end type of a pipe is needed so that they can connect to fittings and pipes of different sizes.
The bushing on the other hand focuses on connecting pipes of varied diameters by reducing the fitting. Take note that bushing cannot reduce a pipe. Bushings are unique in the sense that they are typically threaded.
Filters
AMERICAN DISH SERVICE 285-6161 INTAKE ADAPTER, PUMPED RINSE
ADSCHAMPION 0501736 - BUSHING - SHUTOFF ROD
ChampionOEM: #0501736
CHAMPION 508540 - WASH ARM BUSHING
ChampionOEM: #508540 WASH ARM BUSHING;1-1/2" DIA, X 2-3/4" LONG, 1/4" HOLE IN TOP, PLASTIC, ;CHAMPION DISHWASHER D-HI, D-HB, D-LF, UHB, UHI, ULF
CMA 13604.00 1/2 X 1/4 BUSHING
CMABRASS BUSHING LENGHT: 5.6 in / 14.22 cm WIDTH: 3.85 in / 9.78 cm HEIGHT: 1 in / 2.54 cm WEIGHT: 0.3 lbs / 136 g SKU: #9CMA13604.00
CMA 13620.20 BOOSTER HEATER 1/2 IN/OUT ADAPTER
CMASTAINLESS STEEL BOOSTER HEATER LENGHT: 6 in / 15.24 cm WIDTH: 4.55 in / 11.56 cm HEIGHT: 1.4 in / 3.56 cm WEIGHT: 0.34 lbs / 154 g SKU: #9CMA13620.20
CMA DISHMACHINES 00761.00 5/8" COMP X 3/4" MIP ADAPTER
CMA5/8 COMP X 3/4 MIP ADAPTER Length: 4.45 in / 11.30 cmWidth: 3.95 in / 10.03 cmHeight: 1.25 in / 3.18 cm SKU: #9CMA00761.00
CMA DISHMACHINES 00761.00 5/8" COMP X 3/4" MIP ADAPTER
SparetekFISHER ADAPTER SET
DEMAFisher Manufacturing has been dedicated to providing its customers with the most advanced commercial plumbing systems available. For three generati...
View full detailsFLOW METER ADAPTER, 1'' BPP X 3/4'' MPT
COLE WIRE AND CABLE1" BPP X 3/4'' MPT SKU: #9DL012063
HOBART 00-110544-00009 - BUSHING - GAUGE PLATE
HobartOEM: #00-110544-00009
HOBART 00-110544-00010 - BUSHING - GAUGE
HobartOEM: #00-110544-00010 REPLACEMENT BUSHING FOR HOBART.~; SEE CROSS REFERENCE(S).~
HOBART 00-478425 - BUSHING - ANTIROTATION
HobartOEM: #00-478425 HOBART 2612, 2712, 2812, 2912
HOBART 00-479143 - BUSHING - WHEEL
HobartOEM: #00-479143
HOBART 00-715075 - BEZEL W/ADAPTERS
HobartOEM: #00-715075 BJWA THERMOSTAT BEZEL AND STEM ADAPTOR KIT;MONTAGUE;SOUTHBEND
HOBART 00-719153 - FLUSH REDUCING BUSHING 1/2 MPT X 3/8 FPT
HobartOEM: #00-719153 BRASS FACE BUSHING,;1/2" MPT X 3/8" FPT FLUSH BUSHING
HOBART 00-844152-00001 - CWC SPRAY ADAPTER
HobartOEM: #00-844152-00001
HOBART 00-893044 - BUSHING,WASH ARM
HobartOEM: #00-893044 COLOR: WHITE ;MATERIAL: NYLON ;INNER DIAMETER: 11/16" | 17 mm ;OUTER DIAMETER: 1 1/16" | 27 mm ;DEPTH: 1/4"
HOBART 01-1000V0-00051 - BUSHING - SPHERICAL
HobartOEM: #01-1000V0-00051 THRUST
HOBART 01-505008-000PS - BUSHING,LID
HobartOEM: #01-505008-000PS COLOR: WHITE ;MATERIAL: PLASTIC ;LENGTH: 1" | 25 mm ;INNER DIAMETER: 1/2" | 13 mm ;OUTER DIAMETER: 5/8" | 16 mm
HOBART 333-60225-00 ADAPTER - HARNESS TO MAIN
HobartOEM: #333-60225-00
HOBART 719158 ADAPTER 7/16 TUBE X 1/4 MPT, EL
HobartOEM: #719158 BRASS MALE 90 DEGREE ELBOW, ;7/16" CCT NUT & FERRULE X 1/4" MPT.
HOBART FE-016-23 - SNAP BUSHING
HobartOEM: #FE-016-23
HOBART FE-024-24 - ELECT SNAP BUSHING
HobartOEM: #FE-024-24
HOBART FP-085-68 ADAPTER 7/16 TUBE X 3/8 MPT, EL
HobartOEM: #FP-085-68 BRASS MALE 90 DEGREE ELBOW, ;7/16" CCT X 3/8" MPT NUT & FERRULE.